Stone Shield
Liquid satin finish sealer for interior use.
For use on unpolished natural stone, terracotta and cement tiles.
Coverage: Approx. 15m2 per litre depending on the porosity of the stone.
Size: 1 Litre
Technical Information
Instructions for use:
Ensure that the surface is completely clean and dry. Retained moisture may cause the Stone Shield to dry opaque or prevent the seal from reaching full hardness.
Rough cut, textured or riven surfaces: Use a paint brush.
Apply a thin coat evenly in one direction. Do not rub or buff. Allow to dry (1 hour minimum) Apply further coats at right angles to previous until an even film is created (max 6 coats).
Honed and smooth surfaces: Apply using a micro-fibre cloth or pad. Pour contents into a flat tray container.
Soak up the solution with the cloth or pad and apply thinly and evenly to the surface. Apply further coats at right angles to previous until an even film is created (max 6 coats).
Do not over apply as too many coats may cause unsightly build up and/or reduce the efficiency of the product. Begins to harden after an hour, but will take a further 3 days to become fully water resistant. If in doubt experiment on spare tiles to establish the correct method of application and optimum number of coats before general use.
Additional Information
Available in 1 Litre and 5 Litre Bottle
Suitable for Interior and Exterior Use
