ECO Pro Tec Cement, Grout and Salt Residue Remover
A rapid action cleaner for removing cement, grout, and salts, residues from all types of paving. For use in dilute or concentrated form.
Ideal for porcelain, sandstone, limestone, slate, granite, brick, terracotta, and concrete paving.
PLEASE NOTE:
Keep out of reach of children. Wear protective gloves and eye protection. Wash hands thoroughly after handling. Not suitable for use on surfaces that are highly polished, (i.e., polished marble, polished travertine, or polished limestone).
Technical Information
View Data Sheet Here
SHAKE WELL BEFORE USE.
In mild cases and on non-absorbent surfaces: Dilute 1 part Cement, Grout & Salt Residue Remover in 4 parts cool water. Apply evenly to the surface using a light pressure sprayer or watering can. Leave for up to 30 minutes keeping surfaces wet with more solution if necessary. Scrub with a deck brush or nylon scrubbing pad and rinse water.
In more severe cases: Dilute 1 part Cement, Grout & Salt Residue Remover in 1-part cool water. Apply liberally and agitate immediately using deck brush, nylon scrubbing pad or rotary scrubbing machine. Leave to for 5-10 minutes, keeping surfaces wet with additional solution. Scrub again and rinse with water.
In extremely severe cases: Dampen the surface with a little water and apply undiluted. Agitate with a nylon pad, scrubbing brush or mechanical scrubber. Immediately extract using a good quality sponge or wet vac and rinse thoroughly with clean water. N.B. Always rinse surfaces thoroughly with cool clean water.
Suitability
Ideal for porcelain, sandstone, limestone, slate, granite, brick, terracotta, and concrete paving.
