Stain Block Eco Sealer
A water-based impregnating sealer for pre and post grouting, suitable for interior and exterior use.
For use on all types of natural stone, terracotta and cement tiles.
Coverage: Approx 15m2 per litre depending on the porosity of the stone.
Sizes: 1 Litre and 5 Litres
Technical Information
Instructions for Use:
Preparation: Ensure surface to be treated is completely clean, dry and free from dirt and grime. If necessary, first wash surfaces with a dilute solution of Deep Clean 1:10 and white pad.
Rinse well to remove residues and leave to dry (24 hours). Rough cut, tumbled, textured or riven surfaces: Shake bottle before use.
Apply generously and evenly using foam roller or paint brush. On more absorbent surfaces apply further coats at hourly intervals until the surface is fully saturated.
Honed, smooth and polished surfaces: Shake the bottle before use. Apply liberally and evenly using a sealant applicator pad, lint free cloth, lamb’s wool applicator or sponge.
Leave surfaces to dry. Remove any residual sealer if still visible after one hour. On vertical surfaces apply from the bottom up.
Additional Information
- Suitable for indoor and outdoor use.
- Waterbased Solution.
